Skip to content
Serving Coral Springs and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (754) 227-8068

Exterior House Painting for Coral Springs Homes

The short answer

Exterior painting in Coral Springs means washing, crack repair, caulking and priming stucco and trim, then applying coatings made for UV, rain and mildew. Price depends on the home's size and condition, height, number of colors, trim detail and the paint system chosen.

Paint on the outside of a South Florida house works harder than paint almost anywhere else in the country. Strong sun bleaches color off the south and west walls, summer humidity feeds mildew on the shady sides, and afternoon thunderstorms soak stucco day after day from May through October. CraftEdge Painters repaints concrete-block and stucco homes, wood fascia, soffits, doors, garage doors and pool-area walls across Coral Springs and nearby Broward County cities. Our approach is simple: spend the time on washing, repairs and primer, choose coatings made for heat and moisture, and apply them under the right weather conditions. This page walks through how an exterior project runs, what drives the price and how to keep the finish looking good afterward.

Is it time to repaint the outside?

Faded color is the first thing most people notice, but it is not the most important sign. Rub your hand along a sunny wall. If it comes away with a chalky white powder, the paint film is breaking down. Look for hairline cracks in stucco, peeling on fascia boards, gaps in caulk around windows and black or green streaks on the north side of the house. Those are the places water gets behind the paint.

Repainting before the coating fails completely is usually simpler than waiting. Once bare stucco or wood is exposed to months of rain, prep work grows and repairs get bigger. Homes in communities with an HOA should also check whether a color approval is needed before work starts. We can help you gather color names and samples for that submission.

Protecting landscaping, pools, cars and windows

Before any washing or painting, we walk the property with you. Plants against the house are covered or tied back, and we wet down foundation beds so they handle rinse water better. Windows, door hardware, light fixtures and AC units are masked. Pavers, driveways, pool decks and screen enclosures get drop cloths where overspray or drips could land. We ask that cars be moved away from the walls on paint days, and we keep ladders and equipment clear of walkways at the end of each day.

Our exterior preparation sequence

Good exterior paint jobs are decided before the first coat goes on. Here is the order we follow on a typical stucco home:

  • Pressure wash walls, eaves and trim to remove dirt, chalk and mildew, with a mildew treatment on stained areas
  • Allow the surface to dry, which in rainy months can take extra time
  • Scrape loose and peeling paint from fascia, soffits, doors and window trim
  • Sand glossy or rough edges so the new coat bonds and the transitions look smooth
  • Patch stucco cracks and small spalls with materials made for masonry
  • Replace failed caulk around windows, doors, hose bibs and penetrations
  • Prime bare stucco, repaired spots and raw wood with a primer suited to that surface

Choosing coatings and sheen for sun, rain and salt air

For stucco and block walls, we usually recommend a high-quality acrylic exterior paint or an elastomeric coating. Elastomeric products go on thicker and stretch slightly, which helps bridge hairline cracks and shed wind-driven rain. Standard acrylics breathe more easily and are a good fit for walls in solid condition. We explain the tradeoffs and let you decide.

Sheen affects both looks and upkeep. Flat or low-sheen finishes hide surface texture on stucco walls. Satin or semi-gloss works better on fascia, doors and trim because it sheds water and wipes clean. Lighter colors tend to hold up longer in direct sun than deep, saturated tones. For homes closer to the coast, salt air adds another layer of wear, so metal railings and fixtures may need a rust-inhibiting primer first.

Applying the coats in a South Florida climate

We check the forecast every day. During the wet season, mornings are often our working window because storms tend to build in the afternoon. Paint needs time to set before rain, so we plan wall by wall rather than starting surfaces we cannot finish. We avoid painting a wall while direct midday sun has made it too hot, because the paint can dry too fast and leave lap marks.

Most homes get two finish coats over primer, applied by brush, roller or sprayer depending on the surface. Trim, doors and shutters are cut in by hand for clean lines. Hurricane season runs from June through November, so if a storm approaches mid-project, we secure materials and pause until it passes.

What affects the price of an exterior repaint

The biggest factors are the size of the home, the condition of the stucco and trim, and how much prep each area needs. Two-story walls, steep slopes and tight side yards take more time and equipment to reach safely. Each added color, especially accent bands, shutters and decorative trim, adds detail work. The paint system matters too, since elastomeric coatings and premium acrylics cost more but are made to last longer under heavy sun. We provide a written quote after seeing the house in person.

After the job, rinse walls with a garden hose a couple of times a year, trim shrubs so they do not rub the paint, and keep sprinklers from hitting the walls. Clean mildew spots early with a mild solution before they spread, and walk around the house after big storms to check caulk joints.

Exterior Painting by city

What to expect

How a visit goes

  1. Honest scope

    We tell you what the surface actually needs, including problems like rotted wood or roof leaks that a painter should not hide.

  2. Weather-aware scheduling

    Exterior coats go on when walls are dry and there is time to cure before the rain, with interior work used to fill stormy stretches.

  3. Respect for your home

    Drop cloths, masking and plant covers go down first, and the work area is tidied every day so you can keep living normally.

FAQ

Common questions

What time of year is good for exterior painting in Coral Springs?

The drier months from November into April are easiest, but we paint year-round by working around afternoon storms and checking the forecast each day.

Should I choose elastomeric paint for my stucco?

It is a strong option for stucco with hairline cracks or heavy rain exposure. Walls in sound condition often do well with a quality acrylic. We will explain both.

Can you help with HOA color approval?

We can provide paint brand, color names and samples you need for your association's submission. Approval itself comes from your HOA.

Do I need to be home while you paint the exterior?

Not necessarily. We need access to outdoor outlets and water, a clear path around the house and cars moved away from the walls.

Do you paint garage doors, front doors and shutters?

Yes. Doors, shutters, fascia, soffits and railings can be included in the same project and painted in a contrasting color if you like.

Plan your next paint project

Tell us about the rooms, walls or cabinets you want refreshed. We will set up a walkthrough, look at the surfaces with you and send a clear written scope.

Request Service Call (754) 227-8068
Call (754) 227-8068 Request Service